Debug Hints and Trouble Shooting
Error Messages
1.
2.
3.
If installing on Windows XP and your PC is connected
to the internet through a firewall the USB install may
take up to 15 minutes if you let it complete normally.
The work-around for this issue is to simply disconnect
your network cable during the USB hardware install.
Make sure all of the Configuration Switches (SW3)
are set in the off position. This configures the DSK for
the factory default settings of little endian processor
mode booting out of the on-board Flash memory.
Some of the Help Files are links to Adobe Acrobat
PDF files. If you intend to access these files you must
have Adobe Acrobat installed on your system.
Many of the error messages below refer to USB
enumeration issues. The following window will appear
when launching CCS or the Diagnostic Utility indicating
the enumeration status .
4.
5.
If you want to verify a successful USB driver install,
open your device manager by right clicking on the My
Computer icon on your desktop and selecting
Properties --> HW --> Device Manager. You should
see a new class “SD USB Based Debug Tools” and
one Spectrum Digital TMS320C6713 DSK installed.
The BUSY LED above the USB connector comes on
when power is applied to the DSK. Do not launch
Code Composer until the LED is off.
The best place to look for DSK
troubleshooting and software
updates is:
http://support.spectrumdigital.com
1.
2.
3.
4.
5.
Message:
Failed: Requires Win98, Win2K or Win XP.
Problem: Your operating system does not support
USB.
Message:
Failed: USB device is NOT enumerated or plugged in.
Problem: Windows cannot find the DSK. Check
power and USB Cable.
Message:
Failed: Load USB Application.
Problem: Loader could not download the DSK
emulation application. The on-board emulation
controller could be in a bad state. Cycle power on the
DSK.
Message:
Failed: USB Channel in use by another app.
Problem: Another application is using the DSK USB
communication channel. Only one application is
allowed to communicate to the DSK over the USB
channel at the same time. Check for active
applications using the Windows Task Manager if open
application is not obvious.
Message:
Waiting for USB Enumeration.
Status: This is a status message which indicates that
Code Composer Studio is waiting for communication
with the on-board JTAG emulator to be established.
This should take less than 10 seconds. Do not hit the
close button unless it is clear that something is wrong
(the progress bar runs forever).
12502 Exchange Dr., Ste 440, Stafford, TX. 77477
506736-4001E
T:281.494.4505, F:281.494.5310
Page 4 of 4
www.spectrumdigital.com
相关PDF资料
702075 PLATFORM DEV DGTL VID FOR DM6437
70G-OAC5AMA OUTPUT MODULE AC G5 20MA 5VDC
70G-OAC5MA OUTPUT MODULE AC G5 20MA 5VDC
70G-OAC5RLY OUTPUT MODULE G5 26MA 5VDC
70GRCK4R-DIN I/O MOUNTING BOARD G5 4POS
70GRCM32-HL I/O MOUNTING BOARD G5 32POS
70GRCP32-HL I/O MOUNTING BOARD G5 32POS
70L-IACA INPUT MODULE AC 6MA 5VDC
相关代理商/技术参数
701895-24C 制造商:SLOAN LED 功能描述:Power Supply, 90-264VAC Input, 24VDC Output, 100W (4A Output)
701898 功能描述:开发板和工具包 - TMS320 EVM320C6455 EVAL MOD W/ C6455 MEZZANINE RoHS:否 制造商:Texas Instruments 产品:Experimenter Kits 工具用于评估:F2802x 核心:TMS320 接口类型:UART, USB 工作电源电压:
701898-000 制造商:TE Connectivity 功能描述:Cable Markers Polyoxymethylene White Box 制造商:TE Connectivity 功能描述:Cable Markers White Box 制造商:TE Connectivity 功能描述:STD02W-M - Bag 制造商:TE Connectivity 功能描述:WIRE & CABLE MARKERS
7018-C 制造商:Tektronix Inc 功能描述:28 CHANNEL 3-POLE CARD
7018-C-5Y-EW-STD 制造商:Tektronix Inc 功能描述:Calibration, Warranties, & Service Plans 5 YEAR KEITHLEYCARE GOLD PLAN
7018FX2-SC 功能描述:18-P,14-10/100TX,2-100FX,FXU,2-M 制造商:b&b smartworx, inc. 系列:* 零件状态:在售 标准包装:1
7018FX2-SC-HV 功能描述:7018FX2-SC-HV SWITCH 制造商:red lion controls 系列:N-TRON? 零件状态:有效 类型:交换机 - 托管型 配置:固定式 + SFP 端口数:18 铜端口:14 铜类型:10/100 光纤端口:2 光纤类型:100BASE-FX(多模) SFP/XFP 端口:2 SFP/XFP 型:SFP,千兆比特 PoE 端口:- 连接器类型:RJ45、SC、SFP 电压 - 输入:40 ~ 160VDC 侵入防护:- 安装类型:DIN 轨道 工作温度:-40°C ~ 70°C 标准包装:1
7018FX2-ST 功能描述:18-P,14-10/100TX,2-100FX,FXU,2MG 制造商:b&b smartworx, inc. 系列:* 零件状态:在售 标准包装:1